6 Replies Latest reply on Nov 22, 2015 1:13 PM by userc_7511 Branched from an earlier discussion.

    Serious Issue: Programming the BCM20736S on a custom PCB

      Sorry Broadcom but I have serious programming issues with the BCM20736S powered at 2,5V with a FTDI TTL-232RG-VIP-WE cable.

      I have checked that the programming packet arrives to UART_RX but, on the other side, nothing happens on the UART_TX.

      What I miss?

      Please support our production that will start next monday.

       

      Thank you in advance.