2 Replies Latest reply on Sep 17, 2020 5:28 AM by AnjanaM_61

    CYBT-413034-EVAL EZ-BT Issues with WICED STUDIO V6.4

    AkJa_4647796

      Hello AnjanaM_61,

       

      I have downloaded Wiced Studio 6.4.0.61 on WINDOWS 64 bit from this link WICED-Studio 6.4.0 Installer (Windows)

       

      Wiced studio 6.4 already has CYBT-413034 platform file, do i need to replace the platform file as written in this KBA? WICED Studio: Platform Files for CYBT-413034-EVAL – KBA223746  ?

       

      I have not included patches file as shown in this KBA Platform and New Patch Files For 20719B1 in WICED 6.4.0.61 - KBA228518

       

      The problem is i couldn't able to upload code. I did the recovery option many times but it of no use .

       

      Downloading application...

      ********* Download Failure *************

      +-----------------------------------------------------------------------------------------------+

      | Follow below suggestions and retry.                                                           |

      |   1. Verify USB-UART driver is correctly installed                                            |

      |   2. Verify SW4 switches are in ON position (CTS, RTS, RXD, TXD)                              |

      |   3. Power cycle CYBT_413034_EVAL and retry.                      |

      |                                                                                               |

      | If this problem persists, the serial flash on the board may be corrupted.                     |

      | Follow below steps to reset CYBT_413034_EVAL board to factory default state.                  |

      | Note: This will erase any user application in the memory and resets the board to default state|

      |   1. Press and hold RECOVER button (SW2)                                                      |

      |   2. Press and hold RESET button (SW1) for 1 second                                           |

      |   3. Release SW1                                                                              |

      |   4. Release SW2                                                                              |

      |   5. Re-program CYBT_413034_EVAL                                                              |

      +-----------------------------------------------------------------------------------------------+

      Download failed. This WICED platform of the SDK only supports download to 20719B1 device.

       

       

      Thank You.