Hello YuMa_1534086 ,
Please refer to the below attached project. It has two projects, one is PSoC6 BLE Observer and other one is PSoC6 BLE Constant Broadcaster.
In PSoC6 BLE Observer project, device scans for the nearby advertising devices continuously and shows the advertising report and scan response data of the advertising devices on the UART terminal (like Tera Term, Hyperterminal).
In PSoC6 BLE Constant Broadcaster, device starts advertising and any nearby observer or central device can receive the advertising data during scanning. The device responds to scan request from devices which are present in the white list. In this project address 0x00A500-B2A230 is added in white list.
A while back I uploaded a Observer/Broadcaster dual-project into the Code sharing forum.
It similar to Yugandhar's version but it also has Terminal command menu interfaces for both projects to allow quite a bit of customization of the Scanning (Observer) and Beacon (Broadcaster) parameters.
These additional features allow you to play with the different parameters to see what might work best for you.
Here's the link: