3 Replies Latest reply on Sep 6, 2020 11:52 PM by YiZ_31

    Does the CCG6DF Support USB 3.2 Gen1 x 2?


      In an x 2 configuration, shall the DP_SYS <-> DP_TOP/DP_BOTTOM passthrough be omitted and the lines connected directly?

      We intend to dynamically support two configurations:

      Config 1: First connector in USB 3.2 Gen1 x 2 mode, second connector in USB 2.0 mode

      Config 2: Both connectors in USB 3.2 Gen1 x 1 mode

      Is it possible to use the CCG6DF to dynamically switch between these two configurations? If not, can you suggest another solution?