1 Reply Latest reply on Sep 2, 2020 3:05 AM by HemanthR_06

    Fx3 connection with type A receptacle

    PrN_4452166

      Hi

       

      we have used an FX3 and Type a Male connector before, There we have swapped an RX and TX lines in the connector to Fx3.

       

      This time we have used a Type A receptacle (Female), Here we have to swap the RX and TX pins or not?

       

      This Type A receptacle is connected to the PC (Like UVC output) by male to male Cable.

       

      Thanks.