0 Replies Latest reply on Sep 15, 2020 5:14 PM by JuyoungJ_06

    2020 Autumn translation program - AN (Application Notes) candidate list

    JuyoungJ_06

      Hello, Contributors

      2020 Autumn translation program is starting from Sep 1th.

       

      For your work for AN - below 50 candidate list is prepared.

      Would you pick one of below AN - and create new thread to claim your work?

       

      Process is as;

       

      1. Pick AN list

      2. Create new Thread for claim work

      3. JENA will provide machine translation version

      4. Contributor will review translation version with English version, and update the translation by themselves

      5. Submit and internal review is done

      6. Score for work

       

      AN titleaddress
      AN214821 - Upgrading Human Interface Device Firmware (Example Protocol, Commands, and Scripts)https://www.cypress.com/documentation/application-notes/an214821-upgrading-human-interface-device-firmware-example-protocol
      AN60305 - USING PSOC(R) 3 AND PSOC 5LP IDACS TO BUILD A BETTER VDAChttps://www.cypress.com/documentation/application-notes/an60305-using-psoc-3-and-psoc-5lp-idacs-build-better-vdac
      AN61904 - HOW HX2LP(TM) ADDRESSES BYTE AND WORD-ADDRESSABLE SPI EEPROMShttps://www.cypress.com/documentation/application-notes/an61904-how-hx2lp-addresses-byte-and-word-addressable-spi-eeproms
      AN218238 - HARDWARE DESIGN GUIDELINES FOR EZ-PD CCG3PA IN POWER ADAPTER APPLICATIONShttps://www.cypress.com/documentation/application-notes/an218238-hardware-design-guidelines-using-ez-pd-ccg3pa-devices-power
      AN97116 - GETTING STARTED WITH EZ-USB(R) GX3(TM)https://www.cypress.com/documentation/application-notes/an97116-getting-started-ez-usb-gx3
      AN64408 - GETTING STARTED WITH NX2LP-FLEX™https://www.cypress.com/documentation/application-notes/an64408-getting-started-nx2lp-flex
      AN13553- USING PROCESSOR CHIP ENABLE AS ADDRESS VALID INPUT TO ANTIOCH(TM)https://www.cypress.com/documentation/application-notes/an13553-using-processor-chip-enable-address-valid-input-antioch
      AN46860 - SCHEMATIC REVIEW CHECKLIST FOR WEST BRIDGE(R) ASTORIA(TM)https://www.cypress.com/documentation/application-notes/an46860-schematic-review-checklist-west-bridge-astoria
      AN75511 - PSOC(R) 3 / PSOC 5LP - TEMPERATURE MEASUREMENT WITH  THERMOCOUPLEShttps://www.cypress.com/documentation/application-notes/an75511-psoc-3-psoc-5lp-temperature-measurement-thermocouple
      AN58827 - PSOC(R) 3 AND PSOC 5LP INTERNAL ANALOG ROUTING CONSIDERATIONShttps://www.cypress.com/documentation/application-notes/an58827-psoc-3-and-psoc-5lp-internal-analog-routing-considerations
      AN60630 - PSOC(R) 3 - 8051 CODE AND MEMORY OPTIMIZATIONhttps://www.cypress.com/documentation/application-notes/an60630-psoc-3-8051-code-and-memory-optimization
      AN218179 - GETTING STARTED WITH EZ-PD(TM) CCG3PAhttps://www.cypress.com/documentation/application-notes/an218179-getting-started-ez-pdtm-ccg3pa
      AN65231 - USB ON-THE-GO (OTG) BASICShttps://www.cypress.com/documentation/application-notes/an65231-usb-go-otg-basics
      REQUIREMENTS FOR  INPUT CLOCK TO WEST BRIDGE(R) DEVICES - AN49081https://www.cypress.com/documentation/application-notes/an49081-requirements-input-clock-west-bridge-devices
      AN49576 - INTERFACING ADMUX SRAM PROCESSORS TO WEST BRIDGE(R) ANTIOCH(TM)https://www.cypress.com/documentation/application-notes/an49576-interfacing-admux-sram-processors-west-bridge-antioch
      AN6076 - DIFFERENCES BETWEEN EZ-USB(R) FX2LP(TM) AND MOBL-USB(TM) FX2LP18https://www.cypress.com/documentation/application-notes/an6076-differences-between-ez-usbr-fx2lptm-and-mobl-usbtm-fx2lp18
      AN1215 - BASIC EMBEDDED HOST USING THE SL811HSThttps://www.cypress.com/documentation/application-notes/an1215-basic-embedded-host-using-sl811hst
      AN72332 - GUIDELINES ON SYSTEM DESIGN USING CYPRESS' USB 2.0 HUB (HX2VL)https://www.cypress.com/documentation/application-notes/an72332-guidelines-system-design-using-cypress-s-usb-20-hub-hx2vl
      AN34359 - PCB LAYOUT GUIDELINES FOR WEST BRIDGE(TM) GENERATION A PERIPHERAL CONTROLLERS IN WAFER LEVEL CHIP SCALE PACKAGEhttps://www.cypress.com/documentation/application-notes/an34359-pcb-layout-guidelines-west-bridge-generation-peripheral
      AN89611 - PSOC(R) 3 AND PSOC 5LP - GETTING STARTED WITH CHIP SCALE PACKAGES (CSP)https://www.cypress.com/documentation/application-notes/an89611-psoc-3-and-psoc-5lp-getting-started-chip-scale-packages-csp
      AN42499 - DEBUGGING EZ-USB FX1/FX2LP FIRMWARE USING THE KEIL DEBUGGER ENVIRONMENThttps://www.cypress.com/documentation/application-notes/an42499-debugging-ez-usb-fx1fx2lp-firmware-using-keil-debugger
      AN58764 - IMPLEMENTING A VIRTUAL COM PORT USING FX2LP(TM)https://www.cypress.com/documentation/application-notes/an58764-implementing-virtual-com-port-using-fx2lp
      AN5033 - WIRELESSUSB(TM) DUAL ANTENNA DESIGN LAYOUT GUIDELINEShttps://www.cypress.com/documentation/application-notes/an5033-wirelessusb-dual-antenna-design-layout-guidelines
      CYRF8935 WUSB-NL CHARACTERIZATION REPORThttps://www.cypress.com/documentation/reference-designs/wusb-nl-radio-driver-api-guide
      AN204438 - HOW TO SET UP FLASH SECURITY FOR FM0+, FM3, AND FM4 MCUShttps://www.cypress.com/documentation/application-notes/an204438-how-set-flash-security-fm0-fm3-and-fm4-mcus
      AN204432 - FM3, FM4 TRACE WITH μVISION AND ULINK PROhttps://www.cypress.com/documentation/application-notes/an204432-fm3-fm4-trace-vision-and-ulink-pro
      AN204471 - FM4 S6E2CC SERIES EXTERNAL MEMORY PROGRAMMERhttps://www.cypress.com/documentation/application-notes/an204471-fm4-s6e2cc-series-external-memory-programmer
      AN205236 - FM3 MB9B500 MICROCONTROLLER WITH UART FLASH LOADER DEMONSTRATION SYSTEMhttps://www.cypress.com/documentation/application-notes/an205236-fm3-cy9b500-microcontroller-uart-flash-loader-demonstration
      AN204427 - SOFTWARE SWITCH FOR DUAL-ETHERNET FM3 MICROCONTROLLERhttps://www.cypress.com/documentation/application-notes/an204427-software-switch-dual-ethernet-fm3-microcontroller
      AN204410 - FM3 MICROCONTROLLER LOW VOLTAGE DETECT INTERRUPT CIRCUIT SETTING/USAGEhttps://www.cypress.com/documentation/application-notes/an204410-fm3-microcontroller-low-voltage-detect-interrupt-circuit
      AN204381 - FM3 MICROCONTROLLER DEEP STANDBY MODE SETTING/USAGEhttps://www.cypress.com/documentation/application-notes/an204381-fm3-microcontroller-deep-standby-mode-settingusage
      AN204379 - FM3, INTERRUPT FACTOR VECTOR  RELOCATE FUNCTION USAGEhttps://www.cypress.com/documentation/application-notes/32-bit-microcontroller-fm3-family-interrupt-factor-vector-relocate
      AN210985 - GETTING STARTED WITH FM0+ FIRMWARE DEVELOPMENThttps://www.cypress.com/documentation/application-notes/an210985-getting-started-fm0-firmware-development
      AN204388 - GETTING STARTED FOR FM4 S6E2DH (GAT-D)https://www.cypress.com/documentation/application-notes/an204388-getting-started-fm4-s6e2dh-gat-d
      AN204414 - LWIP OVER ETHERNET ON FM FAMILYhttps://www.cypress.com/documentation/application-notes/an204414-lwip-over-ethernet-fm-family
      AN205399 - FM3 MICROCONTROLLER, ELECTRICAL WEIGHT ON WASH MACHINEhttps://www.cypress.com/documentation/application-notes/an205399-fm3-microcontroller-electrical-weight-wash-machine
      AN205354 - FM3 MICROCONTROLLER WITH OOB SOLUTION ON BLDC WASHERhttps://www.cypress.com/documentation/application-notes/an205354-fm3-microcontroller-oob-solution-bldc-washer
      AN205353 - FM3 MICROCONTROLLER WITH ELECTRICAL BRAKE APPLICATION ON BLDC WASHERhttps://www.cypress.com/documentation/application-notes/an205353-fm3-microcontroller-electrical-brake-application-bldc
      AN205349 - FM3 MB9AF112L/ MB9AF314L SERIES SINGLE SHUNThttps://www.cypress.com/documentation/application-notes/an205349-fm3-mb9af112l-mb9af314l-series-single-shunt
      AN205406 - DEAD TIME COMPENSATION IMPLEMENTATION IN MB9BXXXX/MB9AXXXX SERIEShttps://www.cypress.com/documentation/application-notes/an205406-dead-time-compensation-implementation-mb9bxxxxmb9axxxx
      TROUBLESHOOTING USB 2.0 SIGNAL QUALITY - AN13632https://www.cypress.com/documentation/application-notes/an13632-troubleshooting-usb-20-signal-quality
      AN204389 - FM0+FAMILY 3-PHASE ACIM SCALAR CONTROLhttps://www.cypress.com/documentation/application-notes/an204389-fm0-family-3-phase-acim-scalar-control
      AN99235 - FM4 S6E2HG SERIES MCU - 16-BIT PWM USING A BASE TIMERhttps://www.cypress.com/documentation/application-notes/an99235-fm4-s6e2hg-series-mcu-16-bit-pwm-using-base-timer
      AN223616 - AFE IMPLEMENTATION USING PSOC 4https://www.cypress.com/documentation/application-notes/an223616-afe-implementation-using-psoc-4
      AN2155 - PSOC(R) EMI DESIGN CONSIDERATIONShttps://www.cypress.com/documentation/application-notes/an2155-psoc-emi-design-considerations
      AN205403 - INVERTER PLATFORM ROTOR POSITION FOR PMSM MOTORShttps://www.cypress.com/documentation/application-notes/an205403-inverter-platform-rotor-position-pmsm-motors
      AN205344 - PI THEORY IN MOTOR CONTROLhttps://www.cypress.com/documentation/application-notes/an205344-pi-theory-motor-control
      AN204878 - FM3 MB9A/BFXXX WITH FLASH PROGRAMMINGhttps://www.cypress.com/documentation/application-notes/an204878-fm3-cy9abfxxx-flash-programming
      AN72419 - WEST BRIDGE(R) BENICIA(TM) HARDWARE DESIGN GUIDELINES AND SCHEMATIC CHECKLISThttps://www.cypress.com/documentation/application-notes/an72419-west-bridge-benicia-hardware-design-guidelines-and-schematic

       

      Thank you for your continuous participation to Community.

      If you have any question, please response to this Thread.

      Thanks,

      Jenna