WICED_MOD_Programmer failed to update SW

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
ilHw_4713311
Level 4
Level 4
5 solutions authored 50 sign-ins 50 replies posted

Hello.

Module: CYBT-413034-02

I want to use "WICED_MOD_Programmer" for update firmware S/W.(WICED_MOD_Prog_v1.5.19.102)

But it failed. I have no idea. Can you please let me know?

pastedImage_1.png

Logs

27-08-2020 09:42:32.663: WICEDModuleProg: Test program stopped.

27-08-2020 09:42:50.940: ProgramManager: Selecting_DUT 1/8

27-08-2020 09:42:51.083: Prog[0]COM41 : Reset DUT to HCI mode instead of Recover mode.

27-08-2020 09:42:51.417: ProgKit423028COM41: Exception on Pull Dut#1 CTS_Pin to LowSystem.TimeoutException: 작업 시간을 초과했습니다.

   위치: System.IO.Ports.SerialStream.ReadByte(Int32 timeout)

   위치: System.IO.Ports.SerialStream.ReadByte()

   위치: System.IO.Ports.SerialPort.ReadByte()

   위치: CyBLE_MTK_Application.ProgBoard.PullDutPin_SAMI265(Int32 DutNo, DutPinName PinName, PullState PullTo, Int32 WaitTime)

27-08-2020 09:42:51.678: ProgKit423028COM41: Exception on Pull Dut#1 XRES_Pin to LowSystem.TimeoutException: 작업 시간을 초과했습니다.

   위치: System.IO.Ports.SerialStream.ReadByte(Int32 timeout)

   위치: System.IO.Ports.SerialStream.ReadByte()

   위치: System.IO.Ports.SerialPort.ReadByte()

   위치: CyBLE_MTK_Application.ProgBoard.PullDutPin_SAMI265(Int32 DutNo, DutPinName PinName, PullState PullTo, Int32 WaitTime)

27-08-2020 09:42:51.956: ProgKit423028COM41: Exception on Pull Dut#1 XRES_Pin to HighSystem.TimeoutException: 작업 시간을 초과했습니다.

   위치: System.IO.Ports.SerialStream.ReadByte(Int32 timeout)

   위치: System.IO.Ports.SerialStream.ReadByte()

   위치: System.IO.Ports.SerialPort.ReadByte()

   위치: CyBLE_MTK_Application.ProgBoard.PullDutPin_SAMI265(Int32 DutNo, DutPinName PinName, PullState PullTo, Int32 WaitTime)

27-08-2020 09:42:52.128: ModeSelectBCM20719: Reset DUT#1 to HCI

27-08-2020 09:42:53.446: Prog[0]COM41 : Reset (COM41) Timeout!

27-08-2020 09:42:53.453: Prog[0]COM41 : Soft-Reset Fail COM41

27-08-2020 09:42:53.460: Prog[0]COM41 : Failed to reset on baudrate = 115200

27-08-2020 09:42:53.472: Prog[0]COM41 : Failed to reset DUT

27-08-2020 09:42:53.485: ProgramManager: ---->SetResult [1,1] = TestFailed

27-08-2020 09:42:53.561: ProgramManager: Selecting_DUT 2/8

27-08-2020 09:42:53.585: ProgramManager: Selecting_DUT 3/8

27-08-2020 09:42:53.613: ProgramManager: Selecting_DUT 4/8

27-08-2020 09:42:53.650: ProgramManager: Selecting_DUT 5/8

27-08-2020 09:42:53.808: ProgramManager: Selecting_DUT 6/8

27-08-2020 09:42:53.904: ProgramManager: Selecting_DUT 7/8

27-08-2020 09:42:54.043: ProgramManager: Selecting_DUT 8/8

27-08-2020 09:42:54.511: WICEDModuleProg: Test program stopped.

0 Likes
1 Solution
SheetalJ
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 500 likes received

Hi ilHw_4713311​,

Have you selected correct COM port & it is not open anywhere else?

Please check configuration in following threads, hope it helps:

CYBT-413034-02 programming through "WICED_MOD_Programmer" app

Programming CYBT-413034-02-EVAL

View solution in original post

0 Likes
2 Replies
SheetalJ
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 500 likes received

Hi ilHw_4713311​,

Have you selected correct COM port & it is not open anywhere else?

Please check configuration in following threads, hope it helps:

CYBT-413034-02 programming through "WICED_MOD_Programmer" app

Programming CYBT-413034-02-EVAL

0 Likes
ilHw_4713311
Level 4
Level 4
5 solutions authored 50 sign-ins 50 replies posted

Thanks!

I had to press recover button on Ev board when updating Firmware.

0 Likes