2 Replies Latest reply on Aug 19, 2020 10:18 PM by FrKi_4757601

    CY8CKIT-142 usage

    FrKi_4757601

      Hi,


      is it possible to use the CY8CKIT-142 board as stand alone, only powered by 5 V to receive commands from a self developed App and generate a PWM signal on an output to drive a transitor with a frequency of 200 Hz and depending on the transmitted AT command a duty cycle between 10 and 90 % ?

       

      If so, would it be right to start with the development kit, build the software for the module and for the Android app?

       

      Thanks, all the best,
      Frank