- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm developing a custom board after the reference design of CY8CPROTO-062-4343W.
I'm using the same LBEE5KL1DX module and will be connected to a PSoC 62 chip exactly as in the reference design of this board.
Other peripherals will be connected the same way.
The goal is to been able to use the same BSP for software development. So is the question: is the firmware for this chip part of the BSP?
second question, am I overlooking something?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In mbed, the WLAN firmware is present in this path mbed-os\targets\TARGET_Cypress\TARGET_PSOC6\COMPONENT_WHD\resources\firmware\COMPONENT_4343W. The WLAN firmware is downloaded into the radio during program execution by the WHD driver. The function whd_bus_sdio_download_firmware(whd_driver) in whd_bus_sdio_protocol.c is used for the same.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Could you please let us know which SDK is being used in your setup? If it is Modus toolbox, the 1DX firmware .bin file is present in /libs/wifi-host-driver/WiFi_Host_Driver/resources/firmware/COMPONENT_4343W when selecting an example project. If it is WICED SDK, it is present in /43xxx_Wi-Fi/resources/firmware/4343W.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm using the Modus Toolbox BSP for Mbed OS. What it is not clear to me is at what point is the firmware programmed in the 1DX chip. I don't see any message on the programming log mentioning the 1DX firmware.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In mbed, the WLAN firmware is present in this path mbed-os\targets\TARGET_Cypress\TARGET_PSOC6\COMPONENT_WHD\resources\firmware\COMPONENT_4343W. The WLAN firmware is downloaded into the radio during program execution by the WHD driver. The function whd_bus_sdio_download_firmware(whd_driver) in whd_bus_sdio_protocol.c is used for the same.