I assume that you are using CY8CKIT-062-BLE for that CE, correct?
With CY8CKIT-062-BLE, according to the Kit Revision(s) there are some limitations/requirements.
You can check the PDL version from the PSoC Creator Menu Project > Build Settings...
In the Build Settings Dialog, select Peripheral Driver Library
Then you can see what PDL version is set for your environment. (My case it's 3.1.2)
You can change the default version from the Menu Tools > Options
or just select "Custom" and specify an appropriate PDL version installed in your system.
To download other version(s) of PDL, go to
Just in case, if I'm totally missing the point. I'm sorry.
Thanks much, your info helps me going forward. I also found a couple issues in my code. I now am able to control the pins fine.