1 Reply Latest reply on Aug 6, 2020 12:16 AM by YatheeshK_36

    cypress usb fx2lp

    doJL_4748381

      I have modified VID,PID in bulkLoop, a firmware routine in the development kit.keil_01.jpg

      Then I added my modified VID and PID in the.INF file of the development kit

      inf01.jpg

      inf02.jpg

      inf03.jpg

      Drivers can be identified in device Manager after installation

      设备_01.jpg

      But it's not recognized in the Control Center

      usb_control_center.jpg

      There is also no way to read the modified VID and PID in CyConsole

      usb_console.jpg

      usb_console_01.jpg

       

        • 1. Re: cypress usb fx2lp
          YatheeshK_36

          Hello,

           

          Can you please send the modified driver folder.

           

          You can also try using the control center application present in the path:  <Cypress installation directory>\EZ-USB FX3 SDK\1.3\application\c_sharp\controlcenter\bin\Release

           

          I have added entries for VID and PID 0002/0002 as a test device to the cyusb3 driver and the control center application in the above path can recognize the device.

           

           

          Thanks,

          Yatheesh