Something similar issue had reported early in What is wrong with WICED I2C ?
And we found that"HW buffer is 64 bytes. In that slave address is 1 byte. So maximum payload is 63 bytes."
Could you please ensure this?
Thanks for your reply.
I understood HW buffer is 64 bytes. In that slave address is 1 byte. So the maximum payload is 63 bytes. So is it not possible to connect this display?
Is there any alternate solution to this?
Thanks and regards,
1 of 1 people found this helpful
Hi NeDh_4602711 ,
As its a HW buffer limitation, there is no other alternate way.
You need to divide and send with multiple I2C transfer of 63 bytes length.