2 Replies Latest reply on Jul 15, 2020 7:31 PM by MaWo_2683956

    CYPD3171-24LQXQ_pb(CCG3PA Power Bank solution SDK)  sink mode protocols

    MaWo_2683956

      I'm using the SDK CYPD3171-24LQXQ_pb, and when Power Bank work under sink mode, does it support PD3.0 or not?

      Why in EZ-PD Configuration Utility Sink Settings only BC1.2 and Apple charger are supported?How could I add other protocols like PD or QC?

      And I used my board with the SDK CYPD3171-24LQXQ_pb, it works in sink mode, and the side of power source supports PD3.0 and QC3.0, why my board only get 9V VBUS from the power source and I changed the Sink PDO as 12V but will not get 12V, how can I get the 12V from the power source?

      PB_config.jpg

      PB.jpg

      PB2.jpg