[CYW920819EVB-02] About Sig certification

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi everyone

Could you provied the materials related to the test results specified by Sig

on the CYW20819 evaluation board (CYW920819EVB-02) for us?

Thanks,

Yang

0 Likes
1 Solution

Hi Yang,

The test result is not needed during the SIG certification for the customer's module. They only need component QDID for it.

View solution in original post

0 Likes
7 Replies
Owen_Zhang123
Moderator
Moderator
Moderator
5 questions asked 500 solutions authored 250 sign-ins

Please check the following qualified information: https://launchstudio.bluetooth.com/ListingDetails/109444

0 Likes
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi XinghaoZ_26

This is qualified information.

I would like to obtain related materials for the results of your SIG test.

(CYW920819EVB-02)

Thanks,

Yang

0 Likes

Could you be more specify about the "related materials" and why you need it?

0 Likes
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi XinghaoZ_26

>"related materials"

It means the result of your SIG test.

> why you need it?

Customer uses CYW20819 to design and develop modules.

They will refer to your test results during the Sig test.

(Customers with high priority)

Thanks,

Yang

0 Likes

Hi Yang,

The test result is not needed during the customer's certification. Also it is not avaliable for the customer.

When they apply a new certification in the SIG. They need to supply the component QDID of the CYW20819 which I already give you in the above response. Then they can re-use the test evidence from the component.

Customer only needs to test the RF-PHY for their module.

YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi XinghaoZ_26

> The test result is not needed during the customer's certification. Also it is not avaliable for the customer.

Sorry, I will clarify what I want.

>It means the result of your SIG test.

I mean that the customer wants the RF test report (or test data) of CYW920819EVB-02.

Is this understanding the same as you?

Could you provide this information for us?

Thanks,

Yang

0 Likes

Hi Yang,

The test result is not needed during the SIG certification for the customer's module. They only need component QDID for it.

0 Likes