1 Reply Latest reply on Jul 6, 2020 12:30 AM by GaneshD_41

    PSoC 62 Pin0[1] WCO_OUT and TRST for JTAG



      In the Hardware Design Consideration of PSoC62 MCU you see that Pin0[1] is used for RTC operation and for JTAG purpose, especially for the TRST signal. I have illustrated this in a block diagram in the appendix.


      My questions:

      Is the signal TRST really needed for JTAG operation ?


      If yes, how should it be designed correctly with the RTC oscillator connected on this Pin ?


      In the PCB design i would put a resistor on the TRST line and if TRST is not used, i would not equip it.