- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Curious on the exact reason that only CY7C65213A can handle RS-485.
Is there a hardware difference or just SCB config?
i.e. CY7C65213 should be able to do it as well with an UART TX_EN pin input enabled (CTS)
please comment
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
CY7C65213A is an enhancement to CY7C65213 part.
Both the USB-Serial parts have fixed firmware and the configuration from CY7C65213A part cannot be programmed to CY7C65213 part.
Thanks,
Yatheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
CY7C65213A is an enhancement to CY7C65213 part.
Both the USB-Serial parts have fixed firmware and the configuration from CY7C65213A part cannot be programmed to CY7C65213 part.
Thanks,
Yatheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
ultra fast response, thanks Yatheesh
so only software related, correct
the uart phy is identical for rs485, right!?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Yes, the UART phy is same, RS485 support is added in CY7C65213A.
Thanks,
Yatheesh