I cannot find where the design resources are (pins, etc) like in psoc creator
Pin configuration settings can be found in the Device Configurator in Eclipse IDE for ModusToolbox. You can find the Device Configurator in the Quick Panel under Tools section as shown -
You can refer to this guide to learn about Device Configurator - Device Configurator Guide.
The Eclipse IDE for ModusToolbox Quick Start Guide walks you through the different steps required to import a code example and program your device. Please let me know if that helps.
I wanted to get an example code for the Oled screen that comes with the kit too
Can you please check the emWin OLED FreeRTOS example and let me know if that is the code example you are looking for? Apart from that, you can find all the code examples in our GitHub repo - GitHub - cypresssemiconductorco/Code-Examples-for-ModusToolbox-Software: This ReadMe links to all available code example…
Regarding peripherals tab, please refer to this thread - GPIO registers are not displayed in memory window
Hope this helps,
Thanks and Regards,
Rakshith M B