1 Reply Latest reply on Jun 23, 2020 10:28 PM by GaneshD_41

    Time Optimal Control - DC/DC converters

    ToUr_4722366

      Hello,

      I would like to understand if a time-optimal control (TOC) of a DC/DC converter can be realized on the PSoC 6.

      The algorithm is rather simple:

      The output voltage is compared to a reference, if it drops - the system enters TOC mode, which consists of two stages:

      1. A logic high signal is generated until an indication is received in the form of a 1->0 transition of a dedicated pin. During this stage, a fast clock based counter measures the duration of this stage.

      2. A logic low signal is generated with time duration that is a function of the duration of the first stage.

       

      Would appreciate any thoughts

      Thanks,

      Tom