4 Replies Latest reply on Jun 22, 2020 8:44 AM by ArBh_290401

    I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ?

    ArBh_290401

      What will be the best interface option for exchanging bi directional  data stream between two PSoC3 boards.

      Regards

        • 1. Re: I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ?
          NoriakiT_91

          What is the distance between two boards?

          What band-width is expected for the data stream?

           

          If the distance is within 1 meter, and the band-width is lower than 1000 bit per second, duplex UART will be suitable.

           

          Regards,

          Noriaki

          • 2. Re: I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ?
            ArBh_290401

            Thanks for the reply. The boards are placed back to back. The distance between the PSoC chips may be a few inches. The data rates 19200 bits per second or more. Regards. 

                On Friday, 19 June, 2020, 06:38:45 am IST, Noriaki Tanaka <community-manager@cypress.com> wrote: 

             

                

            |

             

              Cypress Developer Community 

             

             

             

            |

            I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ?

             

            reply from Noriaki Tanaka in PSoC 3 MCU - View the full discussion

             

            What is the distance between two boards?

             

            What band-width is expected for the data stream?

             

             

             

            If the distance is within 1 meter, and the band-width is lower than 1000 bit per second, duplex UART will be suitable.

             

             

             

            Regards,

             

            Noriaki

             

            Reply to this message by replying to this email, or go to the message on Cypress Developer Community

            Start a new discussion in PSoC 3 MCU by email or at Cypress Developer Community

            Following I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ? in these streams: Inbox

             

             

            This email was sent by Cypress Developer Community because you are a registered user.

            You may unsubscribe instantly from Cypress Developer Community, or adjust email frequency in your email preferences

               

             

             

             

            • 3. Re: I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ?
              AashitaR_11

              Hi ArBh_290401,

               

              As NoriakiT_91 already mentioned, UART would be a suitable interface option. You can refer to the UART code examples available for PSoC 3 by following -> PSoC Creator-> File-> Code Examples-> Device Family = PSoC 3 -> UART_Full_Duplex. Also, you can refer to SPI Code Examples but the constraint being with SPI is the distance between the boards. You will have to implement for UDB based SPI.

               

              Also, Can you please let us know why are you still preferring PSoC 3? We recommend you to have a look at our latest PSoC 6 devices here- https://www.cypress.com/products/32-bit-arm-cortex-m4-cortex-m0-psoc-6 as it has fixed function blocks.

               

              Best Regards,

              Aashita

              • 4. Re: I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ?
                ArBh_290401

                Thanks for the reply !

                    On Monday, 22 June, 2020, 01:36:35 pm IST, AashitaR_11 <community-manager@cypress.com> wrote: 

                 

                   

                |

                 

                  Cypress Developer Community 

                 

                 

                 

                |

                I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ?

                 

                reply from AashitaR_11 in PSoC 3 MCU - View the full discussion

                 

                Hi ArBh_290401,

                 

                 

                 

                As NoriakiT_91 already mentioned, UART would be a suitable interface option. You can refer to the UART code examples available for PSoC 3 by following -> PSoC Creator-> File-> Code Examples-> Device Family = PSoC 3 -> UART_Full_Duplex.  Also, you can refer to SPI Code Examples but the constraint being SPI is the distance between the boards. You will have to implement for UDB based SPI.

                 

                 

                 

                Also, Can you please let us know why are you still preferring PSoC 3? We recommend you to have a look at our latest PSoC 6 devices here- https://www.cypress.com/products/32-bit-arm-cortex-m4-cortex-m0-psoc-6 as it has fixed function blocks.

                 

                 

                 

                Best Regards,

                 

                Aashita

                 

                Reply to this message by replying to this email, or go to the message on Cypress Developer Community

                Start a new discussion in PSoC 3 MCU by email or at Cypress Developer Community

                Following I need to exchange data stream periodically between two PSoC3 boards what will be best interface option ? in these streams: Inbox

                 

                 

                This email was sent by Cypress Developer Community because you are a registered user.

                You may unsubscribe instantly from Cypress Developer Community, or adjust email frequency in your email preferences

                   

                 

                 

                 

                   

                 

                Virus-free. www.avast.com