2 Replies Latest reply on Jun 11, 2020 2:36 AM by GaneshD_41

    how many device can program the CY8CKIT-042-BLE Pioneer board?

    AsD_4717706

      Hello,

                   I am trying to program the CY8C4025AZI-S413 using the PSoC programmer version 3.26.0.2791. The target device is getting detected but not able to program the hex file. The target device is coded with different PC and generated the HEX file and send over an email and then it was tried to program using PSoC program.

       

      error log of programmer--

      Successfully Connected to KitProg/080A17C7031C3400 at 3.45.51 PM | KitProg Version 2.18

      Opening Port at 3.45.51 PM                                      |

      Program Finished at 3.45.48 PM                                  |

                                                                      | FAILED! Can not acquire device in SWD mode!

                                                                      |

      Please, check the following items:

                                                                      |  - the connection between the programmer and the PSoC;

                                                                      |  - the correct programming protocol is selected;

                                                                      |  - the correct connector option is selected.

      Program Requested at 3.45.48 PM                                  |

                                                                      | KitProg Version 2.18