2 Replies Latest reply on Oct 28, 2015 11:35 AM by jota_1939431

    Doing some work inside callbacks for bleprofile_regAppEvtHandler()


      My question loosely related to the below post.


      Re: BCM20736S HIDOFF problem


      In the above post the questioner was advised to register NOP callbacks to bleprofile_regAppEvtHandler() in order to properly retain the GPIO state.

      Is the NOP part of the workaround or is it OK to do whatever the process necessary?

      void application_create(void)


      ...... all other initialization here....




      void app_enter_hidoff(void) { /* Do nothing */ }

      void app_abort_hidoff(void) { /* Do nothing */ }