0 Replies Latest reply on May 29, 2020 12:33 PM by NoTa_4591161

    BLE demo using PSoC 6 and PSoC 4 kit

    NoTa_4591161

      Hello everyone,

       

      Last time I introduced a BLE demo between PSoC 6 kits. The Central side used the PSoC 6 kit and previous software, and replaced the Peripheral side board with the PSoC 4 kit. So, introduce Peripheral side of PSoC4 program, here.

      BLE version is different between PSOC6 and 4, but the basic part is the same.

       

      Environment:

      CY8CKIT-062-BLE and CY8CKIT-042-BKE

       

      Operation

      The touch button on the Central side operates the LEDs on the kit on the Peripheral side. Select the LED with the 0/1 button on the Central side, and adjust the LED brightness with the Slider. Button 0 selects green LED and Button 1 selects blue LED. The operation image is as follows.

      1.png

      The circuit:

      PWM is prepared for LED adjustment on the Peripheral side.
        2.png

       

      That's it.

       

      Thanks,

      Kenshow