What kind of traces you are asking for ? air sniffer traces just shows nothing on air.
Take a look at the enable traces section of the WICED Smart Quick Start Guide (SDK 2.x and TAG3 Board)
The SDK also has an encoded Trace Viewer built in as well (look under the Trace menu).
Well, since this is not a standard example application it does not include debug traces.
That was exactly the point I raised, that there are no example code for this function.
if you mean that I should create an example app and add my own debug traces then please give me more input about what you are looking for in those traces.
I think that's what the developers intended when they asked me to have you include traces with this post.
I believe the assumption was made that you had written some code and it was not working, so they wanted you to insert traces in your code and use them to debug and figure out where the code was failing, then post the output of the traces here.
You are correct. There is no sample code available for this specific application, but according to the developers, it should work.
the code I wrote is part of a bigger project that I obviously can't share here.
I'll write something simplified for the sake of the demo