4 Replies Latest reply on May 18, 2020 1:17 PM by ShAm_4016726

    CY8CKIT-030 example2 - Power Supervision failed to compile under PSOC Creator 4.3

    ShAm_4016726

      Hi,

       

      Getting the following error when compiling CY8CKIT-030 example2 - Power Supervision failed to compile under PSOC Creator 4.3.

      Compiling under PSOC Creator 3.3 work with no issue.

      Any help is appreciated for getting this compiled under 4.3.

       

      The compile output is given below.

       

      --------------- Rebuild Started: 05/13/2020 21:28:19 Project: Example2 - Power Supervision, Configuration: DP8051 Keil 9.51 Debug ---------------

      Deleting file ".\Example2 - Power Supervision.rpt"

      cydsfit.exe -.appdatapath "C:\Users\shahram.amini\AppData\Local\Cypress Semiconductor\PSoC Creator\4.3" -.fdsnotice -.fdswarpdepfile=warp_dependencies.txt -.fdselabdepfile=elab_dependencies.txt -.fdsbldfile=generated_files.txt -.fdsreffile=referenced_files.txt -p "C:\Reposits\localOdin\localCCB\CY8CKIT-030_Examples\Example2 - Power Supervision.cydsn\Example2 - Power Supervision.cyprj" -d CY8C3866AXI-040 -s "C:\Reposits\localOdin\localCCB\CY8CKIT-030_Examples\Example2 - Power Supervision.cydsn\Generated_Source\PSoC3" -- -yv2 -q10 -ygs -o2 -v5 -.fftcfgtype=BE

      Elaborating Design...

      ADD: sdb.M0065: information: Analog terminal "OVUVFaultDetector.uv_cal" on Schematic_035 is unconnected.

      * C:\Reposits\localOdin\localCCB\CY8CKIT-030_Examples\Example2 - Power Supervision.cydsn\Schematic_035\Schematic_035.cysch (Signal: Net_18790)

      * C:\Reposits\localOdin\localCCB\CY8CKIT-030_Examples\Example2 - Power Supervision.cydsn\Schematic_035\Schematic_035.cysch (Shape_7074.146)

      ADD: sdb.M0065: information: Analog terminal "OVUVFaultDetector.ov_cal" on Schematic_035 is unconnected.

      * C:\Reposits\localOdin\localCCB\CY8CKIT-030_Examples\Example2 - Power Supervision.cydsn\Schematic_035\Schematic_035.cysch (Signal: Net_18789)

      * C:\Reposits\localOdin\localCCB\CY8CKIT-030_Examples\Example2 - Power Supervision.cydsn\Schematic_035\Schematic_035.cysch (Shape_7074.144)

      HDL Generation...

      Synthesis...

      Error: pft.M0017: Unable to open control file "Example2 - Power Supervision.ctl": (Syntax error). (App=cydsfit)

      Error: pft.M0000: An internal error occurred in the fitter: (Syntax error). (App=cydsfit)

      Dependency Generation...

      Cleanup...

      Error: fit.M0050: The fitter aborted due to errors, please address all errors and rebuild. (App=cydsfit)

      --------------- Rebuild Failed: 05/13/2020 21:28:30 ---------------