- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Regarding CY8C5287AXI-LP095 and CY8C5288LTI-LP090,
Please let us know foot print.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
If it's a footprint, I recommend looking at the Gerber data in the demo kit.
CY8CKIT-050 for AX package
https://www.cypress.com/documentation/development-kitsboards/cy8ckit-050-psoc-5lp-development-kit
CY8CKIT-059 for LT package
NOTE : The guidelines may differ depending on the manufacturer of each company. Especially the processing of the exposed pad.
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Device Page
https://www.cypress.com/part/cy8c5287axi-lp095
Datasheet
(English)
https://www.cypress.com/file/45916/download
In page 107- 100-pin TQFP
(Japanese)
https://www.cypress.com/file/183366/download
CY8C5288LTI-LP090
Device Page
https://www.cypress.com/part/cy8c5288lti-lp090
Datasheet
(English)
https://www.cypress.com/file/45916/download
In page 107- 68-pin QFN
(Japanese)
https://www.cypress.com/file/183366/download
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
If it's a footprint, I recommend looking at the Gerber data in the demo kit.
CY8CKIT-050 for AX package
https://www.cypress.com/documentation/development-kitsboards/cy8ckit-050-psoc-5lp-development-kit
CY8CKIT-059 for LT package
NOTE : The guidelines may differ depending on the manufacturer of each company. Especially the processing of the exposed pad.
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for reply.
I'll confirm it.
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Our customer cannot review the Gerber data.
Do you have any idea?
Best regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can see it by using the software described in the README.txt in the Gerber data folder.
/*
GraphiCode, Inc. provides a freeware gerber viewer, GC-Prevue, available for download at te following URL:
http://www.graphicode.com/pages/products.cfm#_Toc5
Once this application is installed you can view the *.art files by using the "File | Import" function.
Cypress uses a .art extension for gerber files. Gerber files are ASCII text and are easily identified to someone "learned in the art."
*/
There has been described as "Cypress uses a .art extension for gerber files".
.art file can be opened with the above freeware.
Please confirm for the above.
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Apparently there are CAD Libraries.
I didn't know either.
https://www.cypress.com/cad-resources/psoc-5lp-cad-libraries?source=search&cat=technical_documents
Regards,