1 of 1 people found this helpful
Hi RaDa_4626846 ,
The API might not have used in the specific application which you are looking.
You can add the APIs which I mentioned above to change the tx power.
Could you please confirm whether you want to change the advertising tx power or after LE connection ?
I want to create a mesh network involving 8-10 820 devices. I am implementing Dimmer switch with dimmable lights for this purpose, I just want to check depending upon the Tx power how much distance the network covers. So in this case I would like to change advertising Tx power but will also like to know how to change it after LE connection.
Can you just elaborate the process of adding these APIs? I am new to this.
Please use wiced_bt_mesh_core_adv_tx_power. (Eg. wiced_bt_mesh_core_adv_tx_power=4 is for max power).
You can set this inside mesh_app_init(). Default value is 4. 0 means minimum power and 4 is the max. Actual power table is on the controller.
You can check mesh_provision_client.c if you have any doubt in the usage.