【CYBT-343026-01】About the certification of NCC

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi everyone

Regarding NCC approval, are you promoting with FMA(Full Module Approval) or LMA(Limited Module Approval)?

The following is the previous contact history:

https://community.cypress.com/thread/53602?et=watches.email.outcome

Thanks

Yang

0 Likes
1 Solution
SheetalJ
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 500 likes received

Hi Yang,

It is a Full Module Approval (FMA).

Regards,

Sheetal

View solution in original post

0 Likes
5 Replies
SheetalJ
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 500 likes received

Hi Yang,

It is a Full Module Approval (FMA).

Regards,

Sheetal

0 Likes
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi Sheetal,

>There is no room to print NCC mark and ID on module, it will be shown in the package.

As far as I'm concerned, if FMA, it is necessary to print NCC logo and approval number on the module.

Is it correct?

Thanks,

Yang

0 Likes

Hi Yang,

As mentioned in 【CYBT-343026-01】About the certification IDs of regulations , there is no space on module so it will be printed on package.

Also, it will be really appreciated if you could mention all your queries in one response; that way it will be convenient for us to interact with module team & get answers for your queries soon.

YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi Sheetal,

>As mentioned in 【CYBT-343026-01】About the certification IDs of regulations ,

>there is no space on module so it will be printed on package.

If it is FMA, it must be printed on Module.

Is my understanding correct?

Or it is OK that it will be printed on package for your company.

>Also, it will be really appreciated if you could mention all your queries in one response;

>that way it will be convenient for us to interact with module team & get answers for your queries soon.

I am sorry for your inconvenience.

And thanks for your advice.

When I want to add some questions, the below link has been closed.

【CYBT-343026-01】About the certification IDs of regulations

If possible, could you please tell me how to reopen it?

----------------------------------------------------------------------

Add the questions about certification.

1, Customer will use Class2 output.

Is the certification of each country's radio law in the following URL valid for class2?

I think Yes, is it correct?

https://community.cypress.com/docs/DOC-14196

2, Customer has a question about an IC certification permit.

Is the following understanding correct about the specifications submitted at the time of application?

(1) Within 2 dB from the maximum specification value including deviation in the specifications submitted at the time of application.

(2) Below RF power value stated in the certificate

Note: I don't think the permit will pass unless this condition is met.

----------------------------------------------------------------------

0 Likes

Hi Yang,

Only moderator from Cypress community can lock/unlock the thread, customers cannot do that.

I have unlocked the thread 【CYBT-343026-01】About the certification IDs of regulations , please post your further queries there if any.

I will check internally regarding your recent doubts & update asap.

0 Likes