2 Replies Latest reply on Apr 17, 2020 7:08 AM by DheerajK_81

    Migrate to CY8C62X8,CY8C62XA from CY8C6247FTI-D52T

    JeHu_3414236

      I am using the 1MB flash WLCSP PSoC62 part CY8C6247FTI-D52T and I plan to migrate to the WLCSP CY8C62X8,CY8C62XA with 2MB flash.  What are the differences between the 2 products?  I am only interested in the extra flash/RAM size and I don't want to change anything else if possible.  Can I use the same software project I created in PSoC Creator 4.2/4.3 and change the device in the device selector only?  I do not want to use Modus Toolbox.  Another post in the community said the 2MB parts will be available in May.  Is this still the schedule?

        • 1. Re: Migrate to CY8C62X8,CY8C62XA from CY8C6247FTI-D52T
          GaneshD_41

          Hi,

           

          >>"I am using the 1MB flash WLCSP PSoC62 part CY8C6247FTI-D52T and I plan to migrate to the WLCSP CY8C62X8,CY8C62XA with 2MB flash.  What are the differences between the 2 products?"

          -->PSoC Creator doesn't support CY8C62X8,CY8C62XA family devices. You have to use Modus Toolbox 2.1 for application development of this device family.

           

          >>"Can I use the same software project I created in PSoC Creator 4.2/4.3 and change the device in the device selector only?"

          --> Please note that Dual core support is not yet direct in Modus Toolbox 2.1 . So you cannot directly port the project from PSoC Creator to Modus Toolbox 2.1 in case you are using both the cores in PSoC Creator 4.2/4.3 .Other than this the APIs will be same for both the IDEs since they both use PDL.

           

          >>" Another post in the community said the 2MB parts will be available in May.  Is this still the schedule?"

          --> To be answered.

           

          Thanks

          Ganesh

          • 2. Re: Migrate to CY8C62X8,CY8C62XA from CY8C6247FTI-D52T
            DheerajK_81

            Answering the last unanswered question:

             

            >>" Another post in the community said the 2MB parts will be available in May.  Is this still the schedule?"

            Yes we expect it to be available by the end of Q2 2020 tentatively.

             

            Regards,

            Dheeraj