2 Replies Latest reply on Apr 17, 2020 1:48 AM by PiTu_4684406

    BCM20736S/CYW20736S: DLPostResetDelay_ms meaning in 20736_EEPROM.btp

    PiTu_4684406

      Hi all.

       

      I'd like to know how DLPostResetDelay_ms parameter of 20736_EEPROM.btp affects the BCM20736S programming procedure.

       

      Is it written in the EEPROM/Flash and affects the boot timings at any subsequent chip reset? Or is it only used by the external executable (ChipLoad.exe) in order to start communication with the chip?

       

      I'm asking this because rising DLPostResetDelay_ms from 100 (the value it has in the 20736_EEPROM.btp provided by WICED) to 800 I managed to solve very frequent programming faults (unable to start at all programming procedure).

       

      Thank you in advance.

       

      Best regards,

       

      Peppe

        • 1. Re: BCM20736S/CYW20736S: DLPostResetDelay_ms meaning in 20736_EEPROM.btp
          ZhengbaoZ_96

          Hello:

            I have compared many btp files, it is always set to 100. and:

          from the blog in forum the btp file is loaded by download tools, not written in the flash.

          So do not worry influence to your application or image.

          I am wondering if your hardware has special placement or layout which cause the programming faults .

          Significance of *.btp File

          The *.btp file contains information used by the download tools such as the minidriver location, baud rate, memory section addresses and other details. It also contains information such as the BD ADDRESS which can be changed while programming the device. Some of the parameters are:

          • DLConfigCrystalFreqMHz X 10000 – Frequency of the crystal connected to the device
          • DLConfigSerialControlBaudRate – UART baud rate used for programming
          • ConfigDSLocation – DS1 location offset
          • ConfigDS2Location – DS2 location offset
          • DLConfigSSLocation – SS location offset
          • DLConfigBD_ADDRBase – BD address
          1 of 1 people found this helpful
          • 2. Re: BCM20736S/CYW20736S: DLPostResetDelay_ms meaning in 20736_EEPROM.btp
            PiTu_4684406

            OK, thank you very much for your support.

             

            Best regards,

             

            Peppe