2 Replies Latest reply on Jun 12, 2020 5:33 AM by suve_4718881

    Medtronic cy7c67300

    ahsh_4684291

      Dears,

       

      as you may know, Medtronic has publicly shared the design specifications of its PB560 ventilator here :Download PB560 Ventilator Files | Medtronic

      one of the component used in this device is cy7c67300.

       

      since I am new to this field, I need your help please to answer this question:

      Q1: does cy7c67300 need to be programmed, Or it has it own default loaded program?

      Q2: if it needs programming, where can I find the .bin file? and what SW/HW tools I need?

       

      I am asking this because they mentioned in one of there documents that USB_Firmware_V3.1.bin is available, but the didn't publish it with the compiled files while in Open Ventilator Self Service FAQ | Medtronic  in the last general question they said "We have completed the upload of materials to medtronic.com/openventilator."           

      I will appreciate your help.

      and thanks in advance

        • 1. Re: Medtronic cy7c67300
          HemanthR_06

          Hi,

           

          Q1: does cy7c67300 need to be programmed, Or it has it own default loaded program?

          >> Yes. It needs to be programmed. When shipped, it will only have BIOS in it which can load the final application firmware.

           

          Q2: if it needs programming, where can I find the .bin file? and what SW/HW tools I need?

          >>Medtronic should be contacted for USB_Firmware_V3.1.bin - as the code is developed and compiled by them. Once you have the .bin file you can follow below:

           

          While in BIOS, you can use qtui2c.exe to program scan-wrapped bin file to EEPROM. Please refer to the document mentioned in the following link for more details what software can i use to program cy7c67200 installed in FPGA DE2-115?

          After downloading the kit contents as mentioned in the above link you can find the utility in the below path:

          C:\Cypress\USB\OTG-Host\Tools\Utilities

           

          Regards,

          Hemanth

          • 2. Re: Medtronic cy7c67300
            suve_4718881

            Hi,

             

            Were you able to find USB_Firmware_V3.1.bin , we are also trying to find the same file without any success.

             

            Please let us know.

             

            Regards,

            Sujata