1 Reply Latest reply on Apr 8, 2020 8:13 AM by LePo_1062026

    Ramping_LED_using_Smart_IO example not working (ModusToolbox 2.1)

    LePo_1062026

      I've downloaded the example program "Ramping_LED_using_Smart_IO" for ModusToolbox 2.1.

      I build it (no errors) and program a CY8CPROTO-062-4343W.  It doesn't work.

       

      Am I missing something?

       

      Len

        • 1. Re: Ramping_LED_using_Smart_IO example not working (ModusToolbox 2.1)
          LePo_1062026

          To all,

           

          In the ReadMe.md file there is a line:

          1. Using a jumper wire, connect the Smart I/O output pin to the User LED pin on the board (See Table 1). Observe the ramping effect on the User LED .

          And in Table 1:

          | Board               | Smart I/O Output Pin | LED Pin |

          | --------------------|----------------------|---------|

          | CY8CKIT-062-BLE     | P9[1]                | P13[7]  |

          | CY8CKIT-062-WIFI-BT | P9[1]                | P13[7]  |

          | CY8CPROTO-062-4343W | P9[1]                | P13[7]  |

          | CY8CPROTO-063-BLE   | P9[1]                | P7[1]   |  Red LED P6[3]

          | CY8CKIT-062S2-43012 | A9                   | R.LED   |

          Missed it.  Got it.

           

          Boy I miss the digital (and analog) pin routing capabilities of the PSoC5.

           

          Len