0 Replies Latest reply on Apr 6, 2020 11:45 AM by MichaelF_56

    New Document: Using ModusToolbox Software with a third party IDE...

    MichaelF_56

      AN225588 shows how to integrate ModusToolbox software into IAR Embedded Workbench (EW) or Keil µVision projects. You will learn how to configure your system to match your design, generate configuration code, and use that code in your project. When done, you will understand the resources available to you, and how to use them.

       

      https://www.cypress.com/documentation/application-notes/an225588-using-modustoolbox-software-third-party-ide