- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please reply to the problem as mentioned in the subject.
Regards.
A R Bhattacharya
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ArBh_290401,
Thank you for sharing the information regarding the Kit revision.
You will be contacted by a Cypress representative regarding the replacement of your Kit.
Thank you for your interest in Cypress products.
Thanks and Regards,
Rakshith M B
Rakshith M B
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ArBh_290401
Please let us know if the programming was successful. Can you please program and check if the TFT display is showing anything? Also, please note that the USB must be connected to J28, which is the USB port of PSoC 6 and not the programming USB port.
Thanks,
Hari
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi I have tried to program the kit using J28 USB connector as advised . But PSoC programmer is not able to detect the port and remains blank with messages like " check connecting cables etc." And also notice that some time TFT is showing blank ( white screen) and some times black.Thanks!Arup
On Monday, 6 April, 2020, 08:48:48 am IST, AH_96 <community-manager@cypress.com> wrote:
|
Cypress Developer Community |
|
CE222221 is not working in PSoC6 WiFi-BT Poineer kit. Although "Hello World" program runs successfully. Kit revision is "A",serial no: 1819SO01187
reply from AH_96 in PSoC 6 MCU Community - View the full discussion
Hi ArBh_290401
Please let us know if the programming was successful. Can you please program and check if the TFT display is showing anything? Also, please note that the USB must be connected to J28, which is the USB port of PSoC 6 and not the programming USB port.
Thanks,
Hari
Reply to this message by replying to this email, or go to the message on Cypress Developer Community |
Start a new discussion in PSoC 6 MCU Community by email or at Cypress Developer Community |
Following CE222221 is not working in PSoC6 WiFi-BT Poineer kit. Although "Hello World" program runs successfully. Kit revision is "A",serial no: 1819SO01187 in these streams: Inbox |
This email was sent by Cypress Developer Community because you are a registered user.
You may unsubscribe instantly from Cypress Developer Community, or adjust email frequency in your email preferences
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ArBh_290401
Apologies for the confusion. You are supposed to program the device using the programming USB port as before. I was looking at another CE. Please let us know the PDL version that you are using. You can do this by choosing Tools > Options > Project management > PDL v3 location
If you are using an old version, please upgrade to the latest PDL version (3.1.2) and check if the program works.
Thanks,
Hari
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am using PDL version 3.0.1 only.
Sent from Yahoo Mail on Android
On Mon, 6 Apr 2020 at 11:30 am, AH_96<community-manager@cypress.com> wrote:
#yiv8337533830 * #yiv8337533830 a #yiv8337533830 body {font-family:Helvetica, Arial, sans-serif;}#yiv8337533830 #yiv8337533830 h1, #yiv8337533830 h2, #yiv8337533830 h3, #yiv8337533830 h4, #yiv8337533830 h5, #yiv8337533830 h6, #yiv8337533830 p, #yiv8337533830 hr {}#yiv8337533830 .yiv8337533830button td {}
|
Cypress Developer Community |
|
CE222221 is not working in PSoC6 WiFi-BT Poineer kit. Although "Hello World" program runs successfully. Kit revision is "A",serial no: 1819SO01187
reply from AH_96 in PSoC 6 MCU Community - View the full discussion
Hi ArBh_290401
Apologies for the confusion. You are supposed to program the device using the programming USB port as before. I was looking at another CE. Please let us know the PDL version that you are using. You can do this by choosing Tools > Options > Project management > PDL v3 location
https://community.cypress.com/servlet/JiveServlet/downloadImage/2-229877-482215/pastedImage_2.png
If you are using an old version, please upgrade to the latest PDL version (3.1.2) and check if the program works.
Thanks,
Hari
Reply to this message by replying to this email, or go to the message on Cypress Developer Community |
Start a new discussion in PSoC 6 MCU Community by email or at Cypress Developer Community |
Following CE222221 is not working in PSoC6 WiFi-BT Poineer kit. Although "Hello World" program runs successfully. Kit revision is "A",serial no: 1819SO01187 in these streams: Inbox |
This email was sent by Cypress Developer Community because you are a registered user.
You may unsubscribe instantly from Cypress Developer Community, or adjust email frequency in your email preferences
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ArBh_290401,
Thank you for sharing the information regarding the Kit revision.
You will be contacted by a Cypress representative regarding the replacement of your Kit.
Thank you for your interest in Cypress products.
Thanks and Regards,
Rakshith M B
Rakshith M B