3 Replies Latest reply on Apr 4, 2020 12:46 AM by MoTa_728816

    Missing starter application

    FoWa_4668721

      Hi, I'm new to Psoc 6 and ModusToolbox, I have tried to follow the tutorial video from cypress in YouTube, but I have found out that some starter application such as NewPioneer used in the video is missing in my ModusToolbox, is there a way for me to download and add it manually?

        • 1. Re: Missing starter application
          MoTa_728816

          Hi,

           

          I think that the video was taken more than a year ago with ModusToolbox 1.x

          And there have been a lot taken place.

           

          Currently, the newest ModusToolbox is 2.x.

          And IMHO, it is much improved from the previous version.

           

          If you are starting now, I strongly recommend you to go with the newest version.

          Sadly, I must admit that I don't know the video set for the newest one.

           

          But series of Blogs from MarkS_11-san seems to be a very good starting point along with the Quick Start Guide.

          My First ModusToolbox 2.0 Project

           

          Quick Start Guide.

          https://www.cypress.com/file/504366/download

           

          And in case, if you find any problems/questions, as you did, please post it to this Community ModusToolbox.

          ModusToolbox

           

          moto

          P.S. (Point to Quick Start Guide added later)

          1 of 1 people found this helpful
          • 2. Re: Missing starter application
            FoWa_4668721

            Hi Motoo, thanks for answering my question. About the series of Blogs from MarkS_11-san, as a beginner, I don't really understand what is he doing. Under which part is he typing these code below?

             

            yfs@YFS-T550 ~

            $ mkdir MyFirstProject

             

            yfs@YFS-T550 ~

            $ cd MyFirstProject

             

            yfs@YFS-T550 ~/MyFirstProject

            $ git clone https://github.com/cypresssemiconductorco/mtb-example-psoc6-hello-world

            Cloning into 'mtb-example-psoc6-hello-world'...

            remote: Enumerating objects: 15, done.

            remote: Counting objects: 100% (15/15), done.

            remote: Compressing objects: 100% (13/13), done.

            remote: Total 15 (delta 0), reused 12 (delta 0), pack-reused 0

            Unpacking objects: 100% (15/15), done.

             

            yfs@YFS-T550 ~/MyFirstProject

            $ cd mtb-example-psoc6-hello-world

             

            yfs@YFS-T550 ~/MyFirstProject/mtb-example-psoc6-hello-world

            $ ls -la

            total 64

            drwxr-xr-x 1 yfs 1049089     0 Nov 1 15:40 .

            drwxr-xr-x 1 yfs 1049089     0 Nov 1 15:40 ..

            drwxr-xr-x 1 yfs 1049089     0 Nov 1 15:40 .git

            drwxr-xr-x 1 yfs 1049089     0 Nov 1 15:40 images

            drwxr-xr-x 1 yfs 1049089     0 Nov 1 15:40 libs

            -rw-r--r-- 1 yfs 1049089 12443 Nov  1 15:40 LICENSE

            -rw-r--r-- 1 yfs 1049089 10161 Nov  1 15:40 main.c

            -rw-r--r-- 1 yfs 1049089  5207 Nov 1 15:40 Makefile

            -rw-r--r-- 1 yfs 1049089 17480 Nov  1 15:40 README.md

             

            • 3. Re: Missing starter application
              MoTa_728816

              Dear FoWa-san,

               

              It was my bad, those blogs were a little bit advanced topics.

               

              So I added the Quick Start Guide URL.

              Could you read and try ti first?

               

              Best Regards,

              4-Apr-2020

              Motoo Tanaka