- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
In Datasheet(P50), it is described as follows,
"1 = Device Busy, a Write Registers (WRR), program, erase or other operation is in progress"
Which command specifically refers to "other operation"?
Best Regards,
Kumada
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
The operations which sets WIP bit in status register are mentioned in the datasheet. List of other operations which will set WIP bit below.
- Program ASP register
- Password program
- password unlock
- Autoboot register write
- Program NVDLR
- DYB Write
- PPB Program
- PPB Erase
- PPB Lock Bit Write
Please read the datasheet for more information about these operations. Datasheet: https://www.cypress.com/file/448601/download
Thanks and Regards,
Sudheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
The operations which sets WIP bit in status register are mentioned in the datasheet. List of other operations which will set WIP bit below.
- Program ASP register
- Password program
- password unlock
- Autoboot register write
- Program NVDLR
- DYB Write
- PPB Program
- PPB Erase
- PPB Lock Bit Write
Please read the datasheet for more information about these operations. Datasheet: https://www.cypress.com/file/448601/download
Thanks and Regards,
Sudheesh