11 Replies Latest reply on Mar 12, 2020 7:19 AM by OrAs_4645701

    CYBT-343026 communication failed




      We tried to work with the device CYBT-343026 in HCI mode.


      For short period it was working and now we can’t receive any feedback.


      We tried to do the hard reset with no success.


      We tried to communicate using UART communication which the hex code:

      01 03 0c 00.


      We tried to rewrite the FW using the Bootloader Host, but we received communication error

      When trying to flash the image firmware although the port is connected with baud rate of 115,200

      (Screen shot attached)