1 2 3 Previous Next 30 Replies Latest reply on Mar 4, 2020 11:03 PM by WGT_4383351 Branched to a new discussion.

    How to use Streamer.exe to test transfer between two CYUSB3KIT-003?

    WGT_4383351

      Two CYUSB3KIT-003 are stack connected and the firmware are downloaded to RAM and 8KB file is transfered successfully as 001-87216_AN87216_Designing_a_GPIF_II_Master_Interface.pdf described.

       

      I opened two Streamer.exe are opened, one choose master devices' BULK OUT, anoter choose slave devices's BULK IN and start transfer on both, there is almost no bandwidth and most packet are timeout.

       

      How to test the bandwidth of this configuration?

        1 2 3 Previous Next