Some error in 001-87216_AN87216_Designing_a_GPIF_II_Master_Interface.pdf?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
WGT_4383351
Level 5
Level 5
First like received

In figure 27 of "001-87216_AN87216_Designing_a_GPIF_II_Master_Interface.pdf", pin 5 of J6 is removed. In the schematics for that board, pin 5 of J6 is GND, the why is it removed? (There is no problem to remove it, but there seems to be no reason to remove it too)

0 Likes
1 Solution
JayakrishnaT_76
Moderator
Moderator
Moderator
First question asked 1000 replies posted 750 replies posted

Hello,

In the Superspeed explorer kit, pin 5 of both J6 and J7 are blocked. This is the reason why pin 5 of J6 and J7 are removed in Fig 27 of AN87216.

Best Regards,

Jayakrishna

Best Regards,
Jayakrishna

View solution in original post

0 Likes
2 Replies
WGT_4383351
Level 5
Level 5
First like received

The reason is that pin is blocked in the header.

0 Likes
JayakrishnaT_76
Moderator
Moderator
Moderator
First question asked 1000 replies posted 750 replies posted

Hello,

In the Superspeed explorer kit, pin 5 of both J6 and J7 are blocked. This is the reason why pin 5 of J6 and J7 are removed in Fig 27 of AN87216.

Best Regards,

Jayakrishna

Best Regards,
Jayakrishna
0 Likes