5 Replies Latest reply on Feb 24, 2020 12:24 PM by RaPe_4640831

    Can't program CYW9P62S1-43012EVB-01 from Mbed Studio

    RaPe_4640831

      Mbed Studio seem to require DAPLink mode to connect to above board. My board was in CMSIS-DAP BULK mode and the "Mode" switch button was toggling between BULK and HID mode. When I tried to use the fw-loader to switch to DAPLINK mode it's failing though the KitProg3 version is 1.11. Please let me know how to get this working. Appreciate your help.

       

      Here is the info:

       

      ./fw-loader.exe --device-list

      Cypress Firmware Updater, Version: 2.2.11.491

      (C) Copyright 2018-2020 by Cypress Semiconductor

      All Rights Reserved

       

       

      Info: Start API initialization

      Info: Connected - KitProg3 CMSIS-DAP BULK-100B03F302098400

      Info: Hardware initialization complete (502 ms)

      Connected supported devices:

              1: KitProg3 CMSIS-DAP BULK-100B03F302098400     FW Version 1.11.159

       

      ./fw-loader.exe --mode kp3-daplink

      Cypress Firmware Updater, Version: 2.2.11.491

      (C) Copyright 2018-2020 by Cypress Semiconductor

      All Rights Reserved

       

       

      Info: Start API initialization

      Info: Connected - KitProg3 CMSIS-DAP BULK-100B03F302098400

      Info: Hardware initialization complete (499 ms)

      Info: Disconnected - KitProg3 CMSIS-DAP BULK-100B03F302098400

      Info: Connected - KitProg3 CMSIS-DAP BULK-100B03F302098400

      Error: Wait for device DAPLink connect is timed out

      Mode switch on 'KitProg3 CMSIS-DAP BULK-100B03F302098400' device failed.