1 Reply Latest reply on Jan 20, 2020 4:01 AM by AshokR_56

    ModusToolbox IDE not starting Debug session

    Ashok Ra

      Hi All,

       

      Could not start debugging with CYW920819EVB-02 , Also could not use external Jlink debugger.  Installed latest ModusTool Box 2.0

      Previously everything was working with ModusToolBox 1.0

       

      Thanks
      Ashok R

        • 1. Re: ModusToolbox IDE not starting Debug session
          AshokR_56

          Hi Ashok,

           

          If you installed the ModusToolbox in custom path, please follow the steps to create debug launch configuration.

           

          Make File Changes:

          ENABLE_DEBUG?=1

          CY_TOOLS_PATHS+=C:/ModusToolbox/tools_*      -->(it should point to your installer path)

           

          Create new  Debug Configuration:

           

          Update with Below String values.

           

          And it should work. and suspend at

           

          Thanks

          Ashok Ra

          1 of 1 people found this helpful