3 Replies Latest reply on Feb 5, 2020 2:51 AM by AlakanandaB_86

    PWM output not LOW when Compare == 0

    UrPl_1236626

      Hi,

       

      In a PSoC4 CY8C4146 project I use 16-bit TCPWM in which case the PWM compare value is varied from 0 to some value.

       

      However, for compare value 0, the output is set HIGH instead of LOW, also depicted by the GUI:

      TCPWM-cmp0.png

      Atm the workaround that worked for me is to use PWM + deadband and by setting the deadband further away, but wonder is this bug?

       

      Best regards,
      Uros