- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi everyone,
We are developing a product featuring the CYW88373 chip. This is the first time we are using a Cypress WiFi MAC, so we have some questions in order to get intruduced into this new platform. I don't even know if this is the right place to post these inquiries, in which case I ask you for guidelines in order to properly use the support site.
As first steps, we would like to have some getting started documentation together with the tools (and manuals) we need to calibrate and test the device.
Thanks in advance.
Regards,
Juan.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Correct. Your design team in the US should be able to provide some guidance in this area as well.
We've added you to the Project setup for this effort.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm familiar with the effort you are working on and the community is not the correct place for support. I will ask the Cypress team supporting this effort to add you to the internal project that has been setup.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you Michael for your quick answer.
Which should be my next steps? Should I create a new Case?
Thanks in advance.
Regards,
Juan.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Correct. Your design team in the US should be able to provide some guidance in this area as well.
We've added you to the Project setup for this effort.