- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I recently purchased some CYW920819EVB-02 Evaluation Kits. I am trying to program one of Cypress sample applications (Light Dimmable) via USB (without a debug probe) using ModusToolbox 2.0. I am not able to find instructions on how to do this. In my ModusToolbox Quick Panel I do not see any “Build + Program” option in the Launches section as mentioned in the ModusToolbox IDE User Guide. So do I need to create a launch configuration for the CYW920819EVB-02 so I can program it via USB? If so, what settings should I use in the Debug Configuration window?
Thanks.
Solved! Go to Solution.
- Labels:
-
ispn:38628:1:0
-
l1:314:1:0
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Could you take a look at the following application note: https://www.cypress.com/documentation/application-notes/an225684-getting-started-cyw20819
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Could you take a look at the following application note: https://www.cypress.com/documentation/application-notes/an225684-getting-started-cyw20819