1 of 1 people found this helpful
The recommended parts by Cypress for developing a UVC based application would be the following:
1.) CYUSB3KIT-003 FX3 Development Kit
2.) CYUSB3AAC-004A On Semi InterConnect Board for CYUSB3KIT-003
3.) MT9M114EBLSTCZH3-GEVB On Semi Image Sensor Board
The data sheet for the image sensor can be found here: https://www.onsemi.com/pub/Collateral/EVBUM2524-D.PDF
The change in the parts is because ON SEMI acquired Aptina and released a new image sensor board and for it to be compatible with FX3 Superspeed Explorer Kit, a interconnect board was released as mentioned above.
There is no longer support for the Aptina image sensor board that you have mentioned.
Hope this helps!!!