- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Cypress.
Attached file explains Arduino UNO board size.
A distance between pins is 9.14mm.
But this distance of CYBLE-416045-EVAL is 8.89mm.
Below is board figure of CYBLE-416045-EVAL.
(54.02 + 2.54 – 47.67 = 8.89mm)
Q1)
Why is there difference in distance between pins?
Q2)
When designing Arduino shied, which layout is correct? (9.14mm? 8.89mm?)
Should we design Arduino shield at a distance of 9.14mm?
Best Regards.
Yutaka Matsubara
Solved! Go to Solution.
- Labels:
-
ispn:40211:1:0
-
l1:314:1:0
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The difference is caused by Cypress design. The distance of Cypress EVB is 350mil and the Arduino board is 360mil.
I think the difference will not effect the connection. We will correct our design in the following product.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yutaka Matsubara,
Hmm. It appears you spotted a dimensional issue. Luckily the difference in dimensions is only 0.25mm. In addition, the pin sets "out-of-phase" is at least 49mm apart. Therefore you will find the shield interconnect to be forgiving.
Len
"Engineering is an Art. The Art of Compromise."
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Cypress.
I understand that CYBLE-416045-EVAL and Arduino shield can be connected.
However, I am asking why the difference in distance between pins occurred.
Could you please let us know why this difference occurred?
Best Regards.
Yutaka Matsubara
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The difference is caused by Cypress design. The distance of Cypress EVB is 350mil and the Arduino board is 360mil.
I think the difference will not effect the connection. We will correct our design in the following product.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for your response.
I understand it.
Best Regards.
Yutaka Matsubara