4 Replies Latest reply on Dec 18, 2019 12:06 AM by CaAs_4607266

    CYW43438 Compliance Mode

    CaAs_4607266

      Hi there,

       

      I am currently developing a Raspberry-Pi based product, which is using BLE (no Wifi). We need to CE-certify this product.

      In order to do that, I need to be able to activate the direct test mode on the chip.

      Which HCI command do I have to send? What are the OCF and the OGF and the payload for this command?

       

      According to this document HCI Interface — Vendor Specific Guide 5.00.00 documentation  this is part of the vendor-specific commands.

      Which are the correct commands for the chip I am referring to? How can I trigger this mode?

       

      I also need to be able to count the number of valid received BLE packets. How can I do that?

       

      Thanks and best regards,

      Caroline