--- Inquiry background ---
CY8CMBR3108 does not have a reset terminal.
For example, I want to turn off the power when malfunctioning due to noise.
At this time, I want to turn off the power after dropping pins 14 to 16 to low level at the host.
I want to confirm the output terminal configuration of pins 14 to 16 of CY8CMBR3108.
I understand that pins 14-16 are open drain terminals.
Do these pins not output High in the internal settings?
I don't think pins 14-16 are open drain and these pins never output high.
I want to make sure that this is correct.
1. Pins 14, 15 and 16 are open drain drives low pin therefore it can not be driven high without an external pull up.
2. Pin 12 can be used as a reset pin during boot up. Make certain that this pin is not grounded during power-up for the device to boot up properly. After boot-up, this I/O functions as indicated by the pin name.
Hope this helps.