3 Replies Latest reply on Dec 17, 2019 10:58 PM by ZhengbaoZ_96

    PI 3B+: Using Protected Management Frame in AP not working

    MaMo_4521466

      On running PI3B+ with Linux kernel 4.14.y as an AP (using wlan0), if protected management frame is enabled in the hostapd (ver : 2.9) with configurations as follow, the clients are not getting connected :

      wpa=2

      ieee80211w=2

      key_mgmt=WPA-PSK

       

      I could see the error in client that AP is not MFP capable. If ieee80211w=0 is used, STA is getting connected. Have anyone tried using protected management frame (ieee80211w=2) and get the client connected. Is this a known limitation or any firmware/kernel fix available. ?