Can you please let us know which device you are using?
For designing the schematic of your custom board you can refer to your respective device's hardware design considerations document.
Thanks and Regards,
Rakshith M B
Thanks for the reply!
I am using CX3 in my design, can you please confirm if any hardware strapping is required for the JTAG pins of CX3/FX3?
I can confirm that CX3 doesn't need any external hardware strapping on the JTAG pins.
As mentioned in the datasheet, the JTAG pins: TDI, TMC, and TRST# signal has fixed 50k internal pull-up resistor and TCK has fixed 10k pulldown resistor.
Thank you for the reply!