10 Replies Latest reply on Dec 11, 2019 9:58 PM by RashiV_61

    FX3 is not detecting in Control Center

    poas_4520791

      Hi,

       

      I am using the below attached firmware to transfer data from P-Port to S0-Port of FX3.The data from DDR3 is sent to P-Port of FX3.Before programming FX3,it is detecting as a Bootloader device in Control Center but after programming the below firmware,it is showing nothing in control center.Can anyone please check this at your end and let me know what might be the reason?

       

      Regards,

      Aswini.